Green 100 x 150 (4" x 6") Colour Direct Thermal Labels 400/Roll 25MM Core

SKU: LA100150TP1AC25MMPG
FOUND A CHEAPER PRICE? *
Write a Review
 
Excl.GST: $19.55
Incl.GST: $21.50
BUY NOW

100mm (W) x 150mm (L) green direct thermal labels, 400 per roll, 25mm core, permanent adhesive. No ribbon goes into the printer: a direct thermal printhead develops the image on the heat-sensitive label face. Perforated between labels and sized to the 4" x 6" footprint Australian couriers print to, in green for the orders that have been checked, passed and cleared to go.

Colour note: colours can look different from one screen to another, so the actual colour may differ from the image shown. Product images are for representation purposes only. Please use the product details and specifications on this page when making your purchase decision.
Label Size100mm (W) x 150mm (L), 4" x 6"
Labels Per Roll400 (1 across)
Core Size25mm (1 inch)
Print TypeDirect Thermal (no ribbon needed)
ColourGreen
AdhesivePermanent
PerforatedYes, between each label
Please note: this roll is supplied in a minimum order of 6 rolls.

Only part of the run needs colour. Everything that is not flagged can print on the white equivalent, same size and roll count on the same core: 100mm x 150mm white direct thermal labels, 400 per roll.

More About Green 4x6 Labels

Direct thermal is the simplest printing method a despatch bench can run. There is one consumable, one thing to load and one thing to reorder, and the printer has no ribbon path to thread or jam. That is why it dominates shipping labelling, where the label only has to survive the trip. It is not the method for permanence: heat, sunlight and friction all keep developing the coating after printing, so a label that must stay sharp for years should be produced on thermal transfer stock with a ribbon behind it.

Green reads as go. It is the natural colour for orders that have cleared a step: picked and checked, QA passed, payment settled, packed and staged for the carrier. Used that way it turns a staging area into something a supervisor can audit from the doorway, because anything without a green label is still in progress. Some warehouses run it the other way and reserve green for approved or compliant stock lines. Either way the colour sits in the label material, so the signal holds even when the print comes out light.

Every roll carries 400 labels one across on a 25mm (1 inch) core, the standard fit for 4 inch desktop direct thermal printers such as Zebra ZD, TSC, Brother and Godex. 100mm x 150mm is the metric 4" x 6" shipping size, so eParcel, StarTrack, Sendle, Aramex, Couriers Please and TNT consignment labels print to it without adjustment. The permanent adhesive is rated for cartons, satchels and most clean, dry surfaces, and every label is perforated so it tears off straight without a cutter.

Also searched as: green 4x6 labels, green shipping labels, 100x150mm green labels, green direct thermal labels, 4x6 green thermal labels, QA passed labels, green courier labels, colour coded warehouse labels, green 400 per roll labels, 100mm x 150mm green DT labels.

Frequently Asked Questions

Does this size match 4" x 6"?
Yes. 4 inches is 101.6mm and 6 inches is 152.4mm, so 100mm x 150mm is how the 4x6 shipping label is sold in metric. It suits any 4 inch desktop label printer and matches Australia Post eParcel, StarTrack, Sendle, Aramex and Couriers Please consignment output.
Is a ribbon needed to print these?
No. Direct thermal stock develops its own image under heat from the printhead, so there is no ribbon, ink or toner to buy. A ribbon is only involved if you switch to thermal transfer labels for print that has to resist fading.
What do warehouses use green labels for?
Signalling that a step is complete. Picked and checked, QA passed, payment cleared, packed and staged for pickup. It is also used to mark approved or compliant stock lines. The point is that anything without the colour is still outstanding.
How long will the print stay readable?
Long enough for shipping, despatch and short-term stock marking. Direct thermal print softens with sustained heat, direct sunlight and abrasion, so for labels that must stay legible for years, use thermal transfer stock with a matching ribbon.
Which printers run these labels?
Any direct thermal printer taking 4 inch wide media on a 25mm (1 inch) core, including Zebra ZD, TSC, Brother and Godex desktop units. Set the media size to 100mm (W) x 150mm (L) in the driver and select gap sensing.
Is there a perforation between labels?
Yes. Every label is perforated from the next, so each tears off cleanly by hand and no cutter or peeler module is needed.
How many per roll, and is there a minimum order?
400 labels per roll, one across, on a 25mm (1 inch) core, with permanent adhesive and perforation between each label. The minimum order on this line is 6 rolls.

Use this roll where the colour means finished: picked and checked, QA passed, packed and staged for pickup. Colour only earns its place on part of the run, so plain white 100mm x 150mm stays the cheaper option for standard parcels, and if you run a mid-range printer that takes a 76mm core, the 1000 label roll is the better fit for volume. Want help matching stock to your printer? Call POS PLAZA on 1300 115 808.

Adhesive: Permanent
Core Size: 25mm
Label Width: 100mm
Label Length: 150mm
Colour: Green
Print Method: Direct Thermal
Labels Per Roll: 400
Perforated: Yes