Nexa NP-1653+ 15" All-in-One POS Terminal (Intel N95, 8GB RAM, 120GB SSD, Windows 11)

SKU: NP1653+N95
FOUND A CHEAPER PRICE? *
Write a Review
Excl.GST: $1,117.27
Incl.GST: $1,229.00
Warranty:
24 Months Return to Base
BUY NOW
All In One POS Terminal

Nexa NP-1653+ 15 Inch All In One POS Terminal

A fanless 15 inch Windows touch terminal in an aluminium case, with Windows 11 IoT Enterprise already licensed and loaded, built to sit on a counter and run all day without a fan pulling dust through it.

  • 15 inch PCAP touch
  • Intel N95 fanless
  • 8GB / 120GB SSD
  • Windows 11 IoT included
  • 6 USB, 2 serial
  • 24 Months Return to Base

At a glance

ModelNexa NP-1653+
Screen15 inch PCAP, 1024 x 768
ProcessorIntel N95, up to 3.40GHz
Memory8GB DDR4
Storage120GB SSD, user accessible
Operating systemWindows 11 IoT Enterprise
CoolingFanless
Net weight4.3 kg
Warranty24 Months Return to Base
Nexa NP-1653+ 15 inch all in one POS terminal in black, shown on its weighted removable stand with the touch screen facing forward

The Nexa NP-1653+ is an all in one Windows till: screen, computer and stand in a single aluminium chassis, with nothing to cable together on the counter. The operator works on a 15 inch 4:3 projected capacitive panel at 1024 x 768, which is the resolution most Australian point of sale layouts are drawn for, and the kind of glass that takes a fast repeated tap all day and wipes clean at the end of a shift.

Behind it sits a quad core Intel N95 running to 3.40GHz with 8GB of DDR4 and a 120GB SSD. The important part is what is not in there: no fan. A fanless terminal makes no noise across a quiet dining room, and more usefully it has no air intake drawing flour, grease or dust through its electronics, which is the single most common way a counter PC dies early. Windows 11 IoT Enterprise is preloaded and the licence is in the price, the SSD is reachable for service, and the base lifts off for wall or pole mounting. Supported in Australia by POS PLAZA on 1300 115 808.

Why this terminal

15 inch capacitive glass

A 4:3 projected capacitive panel at 1024 x 768, the aspect and resolution most POS layouts are built for, responsive to fast repeat taps and easy to wipe down.

Fanless Intel N95

Quad core to 3.40GHz with no fan in the case. Silent at the counter, and no intake pulling dust and grease through the electronics.

Windows in the price

Windows 11 IoT Enterprise is preloaded and included, so there is no separate licence to buy and no first boot spent installing an operating system.

Ports for a full counter

Six USB, two serial, gigabit Ethernet, VGA and an RJ11/12 drawer jack, which is a printer, a scanner, a drawer and a pin pad without a hub.

Service without a trip

The 120GB SSD is user accessible, so a drive swap or an image restore is a counter job rather than a return to the workshop.

Aluminium, and it comes off its base

Slimline aluminium and metal rather than moulded plastic, and the stand is removable for wall or pole mounting when the counter is tight.

Where it earns its place

Cafes and quick service

Silent running matters in a small dining room, and a sealed fanless case is the right answer in a space full of flour, steam and grease. The glass wipes down between services.

Retail counters

Two serial ports and six USB drive an existing printer, scanner and drawer without adapters, so an older counter can be re-terminalled without replacing the peripherals around it.

Kiosks and tight service areas

With the base removed the terminal wall or pole mounts, which recovers the bench in bars, takeaway windows and anywhere the till is competing with the work surface.

Full specifications

BrandNexa
ModelNP-1653+
SKUNP1653+N95
Product typeAll in one touch POS terminal
Display15 inch 4:3 TFT LCD, 1024 x 768, projected capacitive touch
ProcessorIntel N95 quad core, up to 3.40GHz, fanless
Memory8GB DDR4 as supplied (the platform accepts 8GB to 16GB)
Storage120GB SSD as supplied, user accessible (the platform accepts 128GB to 1TB)
Operating systemWindows 11 IoT Enterprise, preloaded and included in the price (the platform also supports Linux)
USB ports4 x USB 2.0, 2 x USB 3.0
Serial ports2
NetworkRJ-45 Ethernet 10/100/1000Mbps
Other portsAudio x 1, VGA DB-15 x 1, DC jack 12V, RJ11/12 cash drawer jack
Power supplyAC 100-240V 3.5A in, DC 12V 5A out
Dimensions356 W x 346 H x 222 D mm
Net weight4.3 kg
Operating temperature0 C to 40 C
Storage temperature-40 C to 50 C
ConstructionSlimline aluminium and metal case, fanless
MountingRemovable base, wall or pole mount supported
Factory optionsMSR with i-Button Dallas key combo, RFID, Wi-Fi, 10.1 inch rear customer display, 2 x 20 VFD or LCD customer display, Intel Core i3 or i5 processor, wall mount
ColourBlack
Warranty24 Months Return to Base, with a 3 year on site upgrade available

How it compares in the Nexa terminal range

  NP-1653+ (N95) NP-1653+ (N97) NP-1653+ Dual Display NP-2170
Operator screen15 inch PCAP, 1024 x 76815 inch PCAP, 1024 x 76815 inch PCAP, 1024 x 76815 inch PCAP
Customer screenFactory optionFactory option10.1 inch rear LCD, fittedFactory option
ProcessorIntel N95 quad core, to 3.40GHzIntel N97 quad core, to 3.60GHzIntel N97 quad core, to 3.60GHzIntel Core i3, 12th generation
Memory and storage8GB, 120GB SSD8GB, 120GB SSD8GB, 120GB SSD8GB, 128GB SSD
CoolingFanlessFanlessFanlessFanless
Chassis and portsIdenticalIdenticalIdenticalDifferent platform
Best forThe standard counter till, and the build we hold in depthThe same terminal with slightly more processor headroomCounters that want the customer to see the sale, with no second display to buy or mountHeavier workloads, several applications open at once or a demanding back office load

What is in the box

  • Nexa NP-1653+ terminal with the 15 inch touch screen
  • Removable weighted stand
  • Power supply and lead
  • Windows 11 IoT Enterprise, preloaded

Before you order

Decide on the options now

MSR, RFID, Wi-Fi and the rear customer display are factory options on this platform rather than parts that clip on later. If you want any of them, say so with the order and we will quote the right build.

Check the counter depth

The terminal is 356 mm wide, 346 mm high and 222 mm deep on its stand and weighs 4.3 kg, so check both the footprint and that the shelf will carry it before it arrives.

Think about on site cover

The standard warranty is 24 months Return to Base. If the till cannot be off the counter for a repair, a 3 year on site upgrade is available. Ask us to check your postcode.

Frequently Asked Questions

What is the difference between the N95 and the N97 version of this terminal?

The processor, and nothing else. Both builds use the same chassis, the same 15 inch 1024 x 768 capacitive screen, the same 8GB of memory, the same 120GB SSD and the same port set. The N95 runs to 3.40GHz and the N97 build to 3.60GHz. For a till running point of sale software, a browser and a receipt printer the two behave the same. The N97 is worth specifying only if the terminal is also carrying heavier background work.

Is Windows included, or do I buy a licence separately?

Included. The terminal ships with Windows 11 IoT Enterprise preloaded and the licence is in the price. IoT Enterprise is the edition built for fixed function machines like a till, which is why it is used here instead of a retail copy of Windows.

What can I plug into it?

Four USB 2.0 ports, two USB 3.0 ports, two RS-232 serial ports, gigabit Ethernet, a VGA output, an audio output and an RJ11/12 cash drawer jack. In practice that covers a receipt printer, a barcode scanner, a cash drawer, a pin pad and a scale at the same time without a USB hub. The serial ports matter if you are keeping older peripherals.

Will my existing cash drawer work?

Almost certainly. The RJ11/12 jack on the terminal fires a standard POS drawer directly, and if your drawer is currently triggered by the receipt printer it can stay wired that way instead. Either arrangement works.

Can the memory or the drive be upgraded later?

Yes, within the platform's limits. As supplied it has 8GB of DDR4 and a 120GB SSD. The NP-1653+ platform takes up to 16GB of memory and up to a 1TB drive, and the SSD is user accessible so a swap does not mean stripping the terminal down. Tell us before you order if you want it built with more.

Does it need clearance for a fan vent?

No. The terminal is fanless, so it can sit in an enclosed or dusty counter position without an air path pulling debris inside, and it adds no noise to a quiet room. It is the right choice for a kitchen pass or a small dining room.

Can I add a customer display to it later?

The rear display is a factory option on this part number rather than a field upgrade. If you want the customer to see the sale, the cleanest route is the dual display build, which arrives with a 10.1 inch rear LCD already fitted, cabled and driven by the terminal. Call us and we will point you at the right part number.

Can I take it off the stand and mount it?

Yes. The base is removable and the chassis supports wall or pole mounting, which frees up the counter in small service areas. Wall mount hardware is a factory option, so ask for it with the order.

What warranty does it carry and can I get on site cover?

It carries a 24 Months Return to Base warranty as standard. A 3 year on site upgrade is available and covers most metropolitan areas, so call POS PLAZA on 1300 115 808 to check your postcode and add it to the order.

Summary

The Nexa NP-1653+ (SKU NP1653+N95) is an all in one Windows POS terminal with a 15 inch 4:3 projected capacitive touch screen at 1024 x 768, driven by a fanless Intel N95 quad core processor running to 3.40GHz with 8GB of DDR4 and a user accessible 120GB SSD. Windows 11 IoT Enterprise is preloaded and included in the price. Connectivity covers four USB 2.0 and two USB 3.0 ports, two RS-232 serial ports, gigabit Ethernet, VGA, audio and an RJ11/12 cash drawer jack, powered by a 100-240V supply delivering DC 12V at 5A. The terminal measures 356 x 346 x 222 mm and weighs 4.3 kg, is built from slimline aluminium and metal, runs from 0 C to 40 C, and lifts off its base for wall or pole mounting. MSR with an i-Button Dallas key combo, RFID, Wi-Fi, a 10.1 inch rear customer display and Intel Core i3 or i5 processors are available as factory options. It carries a 24 Months Return to Base warranty with a 3 year on site upgrade available. Sold in Australia by POS PLAZA, 1300 115 808, with free shipping over $500 (excl. GST).

Building the counter around it? Add a printer and a drawer.

Shop receipt printers
Manufacturer: Nexa
Brand: Nexa
Model: NP-1653+
Processor: Intel N95 Quad Core (Up to 3.4GHz)
RAM: 8GB
Storage: 120GB SSD
Screen Size: 15 Inch
Touch Technology: Projected Capacitive
Operating System: Windows 11 IoT Enterprise
Material: Aluminium / Metal
Cooling: Fanless
Warranty: 2 Years Return to Base