56 x 100mm Synthetic Waterproof Thermal Transfer Labels - 25mm Core, 500/Roll

SKU: TTS56X100/25
FOUND A CHEAPER PRICE? *
Write a Review
 
Excl.GST: $39.00
Incl.GST: $42.90
BUY NOW

56mm (W) x 100mm (L) synthetic thermal transfer labels, 500 per roll, 25mm core, permanent adhesive. Waterproof and tear-resistant synthetic stock, made to stay stuck and legible where a paper label would fail.

Label Size56mm (W) x 100mm (L)
Labels Per Roll500
Core Size25mm
MaterialSynthetic (waterproof, tear-resistant)
Print TypeThermal Transfer (resin or wax/resin ribbon required)
AdhesivePermanent
PerforatedYes, between each label
Please note: the label images shown are for representation only and the label supplied may differ in appearance. Please use the product details and specifications on this page when making your purchase decision.

More About These Labels

The facestock here is a synthetic film, not paper. Water does not soften it, oils and solvents do not break it down, and it does not fibre up or tear when handled hard, so the label and its barcode stay readable.

Print these on a thermal transfer printer with a resin or wax/resin ribbon. That pairing bonds a hard, water and scratch-resistant image to the plastic face, so the print lasts as long as the label does. A plain wax ribbon smears off synthetic stock, and direct thermal will not mark it at all because there is no heat-sensitive coating. The permanent adhesive bonds firmly and is not meant to be lifted again. Perforation between labels lets each one tear off cleanly by hand.

At 56mm (W) x 100mm (L) on a 25mm core, this size is commonly used for drum, chemical and GHS warning labels, carton and outer-packaging labels, outdoor asset and equipment tags, and cold-store or washdown environments. The 25mm core fits desktop thermal transfer printers such as Zebra, TSC, Brother and Datamax.

Also searched as: 56x100mm synthetic labels, 56 x 100mm thermal transfer labels, 56x100mm waterproof labels, synthetic label roll, polypropylene labels, 56x100mm labels Australia, buy 56x100mm synthetic labels online.

Frequently Asked Questions

Are these labels waterproof?
Yes, the stock is. Whether the whole label is depends on the ribbon: resin or wax/resin gives you a print that survives the same soaking the facestock does.
Do I need a special ribbon?
Yes, resin or wax/resin. Wax alone does not bond to a synthetic face and will rub off, and direct thermal cannot print on this stock because there is no heat-sensitive coating.
Will they fit my printer?
They run on desktop and industrial thermal transfer printers that accept a 25mm core and a 56mm label width, including Zebra, TSC, Brother and Datamax. Set the printer to thermal transfer (ribbon) mode.
Can they be used outdoors or in a freezer?
Yes. Paired with a resin ribbon the roll handles outdoor exposure, salt air, chemical splash and freezer temperatures.

Worth it when a paper label has already failed you at this size, or when the label has to stay scannable after a washdown, a freezer cycle or months outdoors. For dry indoor use, paper stock is the cheaper pick. Not sure which label or ribbon suits your printer? Call POS PLAZA on 1300 115 808 or browse the Synthetic Labels range.

Core Size: 25mm
Label Width: 56mm
Label Length: 100mm
Labels Per Roll: 500
Adhesive: Permanent
Perforated: Yes