28mm diameter round white synthetic labels, 500 per roll on a 38mm core. A small circular polypropylene label for jar lids, seals, tamper marking and compliance dots, waterproof and tear resistant. A thermal transfer ribbon is required.
Please note: the label images shown are for representation only and the label supplied may differ in appearance. Please use the product details and specifications on this page when making your purchase decision.
| Label Size | 28mm diameter (round) |
| Labels Per Roll | 500 |
| Core | 38mm (1.5 inch) |
| Print Type | Thermal Transfer (ribbon required) |
| Material | White polypropylene |
| Adhesive | Permanent |
| Perforated | No |
| Colour | White |
More About These Round Labels
A round label sits better than a rectangle on a lid, a cap or a curved surface, and it reads as a seal or a status mark rather than a product label. At 28mm it is large enough for a date, a small code or an inspection mark.
The polypropylene face stock resists water, oils and tearing, so these survive refrigeration, washdowns and outdoor storage. Use wax-resin for general marking, or resin where the print must resist solvents and rubbing.
Also searched as: 28mm round labels, circular labels, jar lid labels, dot labels, round synthetic labels
Frequently Asked Questions
Can I print these on a standard label printer?
Yes. Round labels feed exactly like rectangular ones, and the printer sees the 28mm pitch through the gap sensor. You only need to set the label size correctly in the printer driver or label software.
Do I need a ribbon to print these?
Yes. Thermal transfer printing melts ink from a ribbon onto the label face, so a ribbon is always required. A wax-resin ribbon suits general indoor use, and a full resin ribbon is the right choice where the print has to survive abrasion, chemicals or outdoor exposure.
Are these labels waterproof?
The polypropylene face stock is waterproof and tear resistant, so the label itself will not pulp or fall apart when it gets wet. Pair it with a resin ribbon if the printed text also needs to resist water, solvents and rubbing.
Which printers will these fit?
They suit most desktop and industrial thermal transfer printers, including Zebra, Godex, TSC, SATO, Honeywell and Bixolon, provided the printer takes the roll width and core size listed above. If you are not sure, call us on 1300 115 808 with your printer model and we will confirm.
A practical pick for food producers, laboratories and workshops that need a durable seal or status dot rather than a full product label.
My Account