No. This is a direct thermal printer, so it prints onto heat sensitive label stock with no ribbon to buy or load. That keeps the running cost down. The trade off is that direct thermal print fades with heat and light over months, so it suits shipping labels and pick tickets rather than long life asset tags.

Resolution is how many dots the head lays down per inch. 300dpi (12 dots/mm) is the working figure for this model. Higher resolution matters when you are printing small text, fine logos or dense 2D barcodes onto small labels. For plain product and shipping labels the lower resolutions are usually sharper than they need to be already.

Godex rates it at 127 mm / sec (5 ips) with a maximum print width of 56.9mm (2.24"). The width is the limit on the label itself: anything wider than that cannot be filled edge to edge, so measure your label stock against that figure before ordering.

As standard it offers USB 2.0 (B-Type) Serial port: RS-232 (DB-9) Ethernet port (RJ-45) USB Host Port (A-Type) for User Input and Storage Optional Bluetooth or WiFi Module. Tell us how the printer will sit on your network when you order and we will confirm you have the right build.

Godex supplies its GoLabel design software at no extra cost, which is enough to lay out and print labels without buying a third party package. If you already use a labelling or ERP system you will more likely drive the printer from that instead, through the language emulations listed in the specifications.

A 24 Months Return to Base manufacturer's warranty. Return to base means a faulty unit comes back to us for assessment and repair or replacement rather than an engineer attending site. Consumable parts are excluded, which on a thermal printer means the thermal print head and the platen roller. Both are wear items with a working life measured in printed metres rather than in years, so they are replaced on a service schedule rather than claimed, and POS PLAZA stocks both for this range.

Call us on 1300 115 808. Choosing between resolutions and between direct thermal and thermal transfer is much easier against a printed sample of your own artwork than against a specification sheet.