80mm x 82m Full-Cover Linerless Thermal Receipt Rolls

SKU: T-80-FULLSTICK-82
FOUND A CHEAPER PRICE? *
Write a Review
Excl.GST: $25.00
Incl.GST: $27.50
BUY NOW

80mm wide linerless direct thermal rolls, 82 metres per roll, removable adhesive across the full width. No backing paper and no ribbon: the printer burns the image onto the roll and the label goes straight onto a carton, a satchel, a container, a cup or a shelf edge.

Label Width80mm
Roll Length82 metres
Labels Per RollContinuous, cut to any length
Print TypeDirect Thermal
AdhesiveRemovable, full coverage
LinerNone (linerless)
PerforatedNo
ColourWhite
MaterialBPA and silicone free
Please note: the label images shown are for representation only and the label supplied may differ in appearance. Please use the product details and specifications on this page when making your purchase decision.
Printer requirement: linerless stock needs a printer built for it, with a non-stick platen roller and a linerless cutter. It will not run in a standard receipt printer, and feeding it through one will foul the platen.

Need a stripe adhesive instead? This roll carries adhesive across the full width, which holds better on awkward surfaces but gives the cutter more to work through. A stripe-adhesive 80mm x 82m linerless roll is also available on a 38mm core with black mark sensing.

More About These Rolls

Linerless stock removes the silicone backing paper that a conventional label roll throws away. That puts more label on the same roll diameter, so a roll lasts longer between changes, and it leaves no liner waste to clear up. At 82 metres this is a long-length roll, which pays off anywhere the printer runs all day.

The adhesive here covers the full width rather than running as a stripe down the middle. On a flat carton either will hold, but on a curved takeaway container, a coffee cup, a satchel, a shrink-wrapped pallet layer or a cold surface a stripe lifts at the corners while full coverage stays flat. Because it is removable, a mislabelled item can be corrected by lifting the label rather than rewrapping it, and nothing sticky is left behind.

One roll covers a lot of ground: order and delivery labelling in food service, prep and date marking, shelf edge and markdown tickets in retail, pick and pack and carton marking in a warehouse, and click-and-collect holding shelves. Anywhere a printed docket currently gets stapled, taped or lost, this prints and sticks in one pass.

Also searched as: 80mm linerless rolls, sticky receipt rolls, 80x82 linerless labels, adhesive receipt paper, linerless despatch labels, removable thermal rolls, shelf edge label rolls.

Frequently Asked Questions

Which printers will run this roll?
Any 80mm linerless-capable direct thermal printer, including the Epson TM-L90, the Epson TM-L100 and the Bixolon SRP-S300. The printer needs a non-stick platen and a linerless cutter, so check the model before ordering rather than assuming an existing receipt printer will take it.
How long a label can I print?
The roll is continuous with no perforation and no gap, so the length is set in the printer or the software, not by the stock. One roll can produce short price tickets and long despatch dockets on the same shift without changing media.
Will the adhesive come off cleanly?
It is a removable adhesive, so it lifts off cardboard, plastic, glass, coated board and metal without leaving residue, and it can be repositioned. That suits reusable containers, trays, shelf edges and anything you expect to relabel. On porous or dusty surfaces such as raw timber or an unsealed carton edge the bond is weaker, which is the usual trade-off for a label you can take off again.
How does it compare with a conventional label roll?
There is no backing paper, so you get more metres on the same roll size, fewer roll changes and no liner waste to bin. The trade-off is that it needs a linerless-capable printer, and the roll must be stored away from heat and direct sunlight like any direct thermal stock.
Is there a minimum order, and is freight included?
This stock is supplied by the carton, so the minimum order is 20 rolls. Free shipping over $500 (excl. GST) applies as normal. If you need a smaller trial quantity, call 1300 115 808 and we will see what we can do.
How long will the print last?
Direct thermal print is heat sensitive and will darken or fade with heat, sunlight and friction over time, so treat it as a short to medium term label: orders, despatch, picking, date marking, markdowns and hold shelves. For a label that has to stay readable for years, use a thermal transfer label and ribbon instead.

Choose this roll when the printed docket needs to end up stuck to something and come off again later, whether that is a takeaway bag, a reusable container, a shelf edge, a picked carton or a click-and-collect parcel. If the label simply has to stay on for good, a permanent linerless roll is the cheaper call, and if it has to survive years of heat and abrasion, move to thermal transfer. Not sure your printer is linerless-capable? Call POS PLAZA on 1300 115 808.

Manufacturer: Generic
Label Width: 80mm
Roll Length: 82m
Print Type: Direct Thermal
Adhesive: Removable, full coverage
Liner: None (linerless)
Colour: White
Material: BPA and silicone free
Labels Per Roll: Continuous
Perforated: No