40mm x 25mm silver mylar labels, 2000 per roll on a 38mm core. A metallised asset tag built to stay readable for years on plant, tools and IT equipment, resisting heat, chemicals, abrasion and moisture. A thermal transfer ribbon is required.
Colour note: colours can look different from one screen to another, so the actual colour may differ from the image shown. Product images are for representation purposes only. Please use the product details and specifications on this page when making your purchase decision.
| Label Size | 40mm (W) x 25mm (L) |
| Labels Per Roll | 2000 |
| Core | 38mm (1.5 inch) |
| Print Type | Thermal Transfer (ribbon required) |
| Material | Silver mylar |
| Adhesive | Permanent |
| Perforated | No |
| Colour | Silver |
More About These Asset Labels
Silver mylar is the standard face stock for asset registers and equipment tagging. It holds a barcode crisply, it does not yellow or pulp, and the metallised finish makes a tagged asset easy to pick out on a shelf or a plant room wall.
Always pair this stock with a full resin ribbon. Wax and wax-resin ribbons do not key properly to a metallised synthetic face and the print will scuff off under the handling these tags are made for.
Also searched as: silver asset labels, mylar asset tags, metallised barcode labels, equipment tagging labels, 40x25 silver labels
Frequently Asked Questions
Which ribbon do these need?
A full resin ribbon. Wax and wax-resin ribbons will not bond reliably to a metallised synthetic face, and the print rubs off. Resin gives the abrasion and chemical resistance an asset tag needs.
What are silver mylar labels used for?
Asset registers, IT equipment, tools, plant and machinery, and anywhere a durable serial number or barcode has to stay readable for the life of the item.
What is the difference between thermal transfer and direct thermal?
Direct thermal labels darken under heat alone and need no ribbon, but the print fades with sunlight, heat and handling. Thermal transfer labels like these use a ribbon and hold their print far longer, which is why they suit asset tags, outdoor use and anything that has to stay readable for years.
Which printers will these fit?
They suit most desktop and industrial thermal transfer printers, including Zebra, Godex, TSC, SATO, Honeywell and Bixolon, provided the printer takes the roll width and core size listed above. If you are not sure, call us on 1300 115 808 with your printer model and we will confirm.
The right stock when a tag has to outlive several audits on equipment that gets knocked about, cleaned down or stored outside, where a paper or standard synthetic label would not survive.
My Account